Students of this discipline will have the advantage of studying not only with a leading engineering department but also with the institute with a number of distinctive strengths. The programme is well supported by excellent faculty and top-class learning facilities. Full-fledged resource labs are available to the students in the areas of:.
Notable characteristic of this department is Mechanical Engineering Association (MEA) established in 2002 which makes GIET engineering college Rajahmundry, a prominent institute among the best mechanical engineering colleges in Andhra Pradesh. It is actively involved in the academic and personal support-activities for the students like group discussions, quiz, seminars etc.,
This association members are known for outstanding performance in technical paper contests. Mr Lal, ONGC Asset Manager KG Project, Rajahmundry was very much impressed with the activities of MEA, and donated books to the department library.
To be recognized as a Global Centre of Excellence in Mechanical Engineering Education, Research and Consultancy.
Department of Mechanical Engineering strives to provide scope for all round development of the students and staff by engaging them in various activities such as:
After the Completion of the program, a successful student will be able to:
Within a few years after the graduation, the graduates will be :
ME program specific outcomes are broken into four elements. The ME curriculum prepares graduates to:
PSO - 1. Join a technically sophisticated workforce as successful professionals in a wide range of mechanical engineering and related fields.
PSO - 2. Continuously improve and expand their technical and professional skills through formal means as well as through informal self-study.
PSO - 3. Pursue advanced degrees in engineering, business, or other professional fields.
PSO - 4. Advance themselves professionally and personally by accepting professional and societal responsibilities and pursuing leadership roles.
Name | Designation |
---|---|
Dr. M. Sreenivasa Rao | Head of the Department and Chairman-BoS |
Dr D Ravi Kumar, | Professor, IIT Delhi. |
Dr. A.Venu Gopal, | Professor, Department of Mechanical Engineering, National Institute of Technology, Warangal. |
Dr B Balakrishna, | Professor, Department of Mechanical Engineering, JNTUK , Kakinada. |
Mr. Rajiv Aramadaka, | Brand Leader Dassault Systems, Dassault Systems India pvt ltd, Bangalore. |
Mr. D. Naveen Raja | Research Engineer, Hyundai Motors, India. |
The MOU was happened between APSSDC, European Center for Mechatronics APS GmbH, Aachen and GIET (A), Rjy. This engagement was aimed to skill the engineering graduates from the state of Andhra Pradesh in Mechatronics and Industrial Robotics. It was proposed to establish Indo-European Skilling Centers for Mechatronics and Industrial Robotics in 40 Engineering Colleges across the state of Andhra Pradesh. ECM has selected 11 Engineering Colleges initially in collaboration with APSSDC under pilot phase. This tie-up is to provide end to end skill training including assessment, certification and facilitating placements to the trained students. The robotics infrastructure established in the respective college henceforth called Applied Robotic Control Labs (ARC Labs).
ARC CYCLE-I: A.Y: 2019-2020
Program: ARC 1.0 (10 Modules/ 10 Weeks Course)
Course Contents: Topics of Mechatronics, Manufacturing, Industrial Automation and Robotics
Period: 8-Dec-2018 to 20-Dec-2018
No. Of students Participated: 38
No. Of students Qualified: 28
Departments Participated: III B. Tech ME, ECE, EEE and AME
Program: ARC 2.0 (10 Modules/ 10 Weeks Course)
Course Contents: Training Course on Advanced Industrial Robotics
Period: 5th August 2019 to 12th August 2019
Software Tools Used: CPRog
No. Of students Participated: 26
No. Of students Qualified: 25
Departments Participated: III B. Tech ME, ECE, EEE and AME
Program: ARC 3.0 (12 Weeks Training + Bachelor Project)
Course Contents: Hands on Experience/ Bachelor Project on Industry scale robots in Industrial setup
Period: 27th Jan 2020 to 3rd March 2020.
Software Tools Used: MotoSim
No. Of students Participated: 24
No. Of students Qualified: 24
Departments Participated: III B. Tech ME, ECE, EEE and AME
ARC CYCLE-2: A.Y: 2020-21
Program: INTERNATIONAL INTERNSHIP PROGRAM
Course Contents: Programming IGUS robot
Software Tools Used: CPRog
Period: 24-Feb-2021 to 14-April-2021
No. Of students Participated: 61
No. Of students Qualified: 26
Departments Participated: III B. Tech ME, ECE and AME
Cycle-I was completed in the Academic Year of 2018-19 which includes ARC 1.0, 2.0 and 3.0 Programs. The students involved in these programs were benefited with International certificates.
Cycle-II was completed in the Academic Year of 2019-20 which includes International Internship. Students got benefited with International Certificates in internship.
Basic Engineering Workshop
Production Technology Lab
Fluid Mechanics & Hydraulic Machinery Lab
Mechanics of Solids Lab
Thermal Engineering Lab
Metallurgy Lab
Machine Tools Lab
Theory of Machines Lab
Heat Transfer Lab
Metrology and Instrumentation Lab
Simulation Lab
Academic Year:2020-2021 |
---|
Santha Rao D., and T S Simhadri, 2021, “Improvements in mechanical properties of aluminium alloy-titanium di boride and boron carbide hybrid composite produced through friction stir processing route,” Materials Today Proceedings, February, |
D. Santha Rao, B. N. V. S. K. Ganesh Gupta, T. Venkateseara Rao, J. Eswera Manikanta, 2020, “Mechanical and microstructural behaviour of aluminium/TiB2 composites fabricated through multi-pass friction stir processing,” Materials Today: Proceedings. |
Santha Rao D, 2020, “Mechanical and Microstructural Properties of AA6061/Bagasse Ash and Rice Husk Composites Fabricated by Stir Casting,” National Conference on Recent Technologies in Engineering and Basic Sciences, Odalarevu, July 16. |
Suman, Ram Babu Pulla (2021). EXPERIMENTAL TESTING OF TENSILE PROPERTIES, ILSS AND IS PROPERTIES AND OF ACRYLIC FIBER-REINFORCED EPOXY COMPOSITE: COMPARISON BETWEEN UNIDIRECTIONAL, BIDIRECTIONAL AND MAT FIBER FORMS.BULLETIN MONUMENTAL.22(5) |
MOHAN. K,REDDY S(2021). EXPERIMENTAL STUDY ON THE THIN-WALLED STRUCTURE WITH NOVEL MULTIPLE CELLS UNDER AXIAL LOADING AND BENDING FOR CRASHWORTHINESS.Studia Rosenthaliana (Journal for the Study of Research).12(12) |
Kumari P. S. Rao M. S. & Krishna M. B (2021). EXPERIMENTAL STUDY ON THE THERMAL PERFORMANCE OF THE VORTEX TUBE WITH VARIOUS TYPES OF ORIFICE NOZZLES AND ORIFICE NUMBERS.BULLETIN MONUMENTAL.22(5) |
Kotla Mounika Devi, E.Nirmala Devi,B.Joga rao (2021).COMPUTATIONAL AND EXPERIMENTAL ANALYSIS OF CORRUGATED VONKARMAN VORTEX STREET PIPE DOUBLE TUBE HEAT EXCHANGER.BULLETIN MONUMENTAL 22(4) |
Rao, D. S., & Simhadri, T. S. (2021). Improvements in mechanical properties of aluminium alloy-titanium di boride and boron carbide hybrid composite produced through friction stir processing route. Materials Today: Proceedings, 45, 5231-5236. |
Rao, D. S., Gupta, B. G., Rao, T. V., & Manikanta, J. E. (2021). Mechanical and microstructural behaviour of aluminium/TiB2 composites fabricated through multi-pass friction stir processing. Materials Today: Proceedings, 44, 413-418. |
Kumar, A., Rath, S., & Kumar, M. (2021). Simulation of plate rolling process using finite element method. Materials Today: Proceedings, 42, 650-659. |
M. Sarat Chandra , Dr. M. Sreenivasa Rao (2021).FABRICATION AND EXPERIMENTAL EVALUATION OF AL - MMC AND STUDY ON ITS APPLICATION TO CYLINDRICAL PRESSUREHULL BY USING COMPUTATIONAL FLUID DYNAMICS AND FINITE ELEMENT ANALYSIS.BULLETIN MONUMENTAL.22(5) |
RAO, D. M. S., RAJASEKHAR, B., RAM, M. S., BRIANANAND, N., & SANGMA, K. (2016). DESIGN AND ANALYSIS OF THERMO-ACOUSTIC REFRIGERATOR.BULLETIN MONUMENTAL.22(7) |
E.Nirmala Devi, Himalaya singh, G.L.S.Bhaskar, G.V.M.Reddy, M.Muralidhar(2021).Design and Analysis of Heat Transfer Rate from Gas Turbine Blade Using Film Cooling.Cooling. International Journal for Modern Trends in Science and Technology 2021 |
Rao, B. J. DESIGN AND ANALYSIS OF AXIAL FLOW COMPRESSOR BLADE USING DIFFERENT MATERIAL.BULLETIN MONUMENTAL.22(7) |
KUMAR, K. J., NAVEEN, B., RAJEEV, P. N., & ROHIT, P. CFD AND THERMAL ANALYSIS OF CONDENSOR AND EVAPORATOR.BULLETIN MONUMENTAL.22(7) |
Dr. TANKESHWAR PRASAD, G Ram Kiran, A Akilesh Gowd, K G Pawan Kumar, ChTharun Kumar (2021).Design and Analysis of Leaf Spring. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 13-19. |
K Gowthami, G M Satyanarayana, N Kishore, K Kiran Babu, K Adi Seshu(2021).Fabrication and Testing of Al6061 TiB2 Graphite by Powder Mettalurgy Technique.International Journal |
for Modern Trends in Science and Technology 2021, 7, pp. 20-24. |
SK. Nayeem; M.VenkataPratap; P.V.V.Prasad; A. Jai Ram and Ch. Lakshmandath(2021). Design and Numerical Analysis of CI Engine Combustion Chamber. International Journal for Modern and Numerical Analysis of CI Engine Combustion Chamber. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 25-31. |
B.A.V. L Sainadh; B.KiranChandra; B. Srinadh; G. Dileep and N. Sai Nikhil Varma.Determination of Mechanical Properties of Al2024+SiC+Gr Hybrid Metal Matrix Composites by using Stir Casting Method. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 32-37. |
K Hemanth; B Rajesh; K S K Adarsh; G Sujith Mourya and D Suman Kumar . Design and Analysis of Engine Block and Different Fins using Cast Iron and Aluminium Material.International Journal for Modern Trends in Science and Technology 2021, 7, pp. 38-44. |
Ramakrishna, G., Krishna, G. S., Suresh, D. V., & Raju, B. G. (2021). DESIGN AND ANALYSIS OF OVAL-TUBE HEAT EXCHANGER BY USING ANSYS AND COMPARING WITH CIRCULAR-TUBE. Design Engineering, 1508-1518. |
M Harika Chowdary; CH Abhinay; S Shyam Kumar; S Vamsi Krishna and P Adithya.Fabrication and Testing of Al6061 B4C using Powder Metallurgy. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 45-50. |
N V S G SasiKiran; P Ashish; D Mahesh and S Venugopal. Design and Analysis of Drain Scrap System for Recycling. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 51-55. |
Alokkumar; Siva Brahma Naidu N; Madhu P and Sai Teja M. Design and Analysis of Hair Pin Heat Exchanger with Different Nano Fluids. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 56-62. |
RajnishKumar Singh; P N Durga Rao; D Venkata Krishna and E Venkata Sandeep. Design and Analysis of IC Engine Piston with Different Material. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 63-69. |
B.A.V.L.Sainadh; A.LalithKanth; A.V.K.Sri Harsha and A.Sidhardha. Modelling and Analysis of Chain Drive with Different Materials. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 1-4. |
SHAFEEQ, M. M. A., PRUDHVI, J. V., KUMAR, P. U., & KUMAR, G(2021). UNMANNED GROUND VEHICLE FOR ARMY SURGICAL OPERATIONS. BULLETIN MONUMENTAL.22(8) |
Dr. Jayananda Kumar T; B V N V Narasimha Butcheswara Rao N; Venkata Reddy A; R S Phani Krishna Y and Rahul Kumar. Design and Analysis of Twist Drill Bit. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 121-126. |
Santha Rao D,Raju Kumar A, Sudarsan Reddy V, Vinay Ch , Saran Bhargav G (2021). Welding fixture design for lap , but and T joint configurations. BULLETIN MONUMENTAL.22(8) |
M Deepak; Pavan Kalyan D; S S S S Bhavani Swamy V; Siva Sai Pavan A and Kalyan V (2021). Comparative study and Analysis of Coil compression Springs with Composite materials.Comparative study and Analysis of Coil compression Springs with Composite materials. |
PVVS. Maneendra P; LalithsaikumarY; Mallikharjunareddy Ch; NagavenkataManoj T and Narayana Swami V. Android Controlled Automatic Jack System for Vehicle. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 136-139. |
Kedaranath M; S D V Prasad M; China Veerraju B and Siva Satya K. Design and Analysis of Venturimeter. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 140-144. |
Veerraju P; Lakshmi Varaprasad A; Cheney Raj Ch; Lokesh Ch and PurnaSai Karthik U.Design and Analysisof Structural Behavior of Spur Gear for Maximum Torque of Off-Road Vehicle. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 150-156. |
Venkatesulu Ch; Siva Kumar A; Dhanunjaya Naidu A; Jaswanth B and Sreenivasa Reddy K. Design and Stress Analysis of Composite Helical Gear Using Finite Element Method.International Journal for Modern Trends in Science and Technology 2021, 7, pp. 145-149. |
Sk. Avinash Kapil; Ch. O. Rameshvamsi; Allu.Vamsi; D.Jaswanth and V.G Vishal Varma. Design and Analysis on Engine cylinder Fins for variable Materials. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 157-162. |
Durga Satish A; Ajay Kumar CH; Naveen B; Bhavya Teja V and Gowthami K5. Design and Structural Analysis of Half Shaft by using Different Materials. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 216-222. |
Prasad.T; Narendra.S; Leela sagar.B; Ravindra varma.B and A.N.Durga Prasad.V. Design and Analysis of Precesion Steering Mechanism using FEM Method. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 163-170. |
Suman D; Saikumar A; Uma Prabhakar S; Satish D.V. V and Rohith Sai Nath Reddy T. Design and Analysis of Helical Wind Turbine Blade. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 171-174. |
M.Harika Chowdary; Ankit Kumar; R Uday Kumar; R Bhanu and Ch.Ajith. Design and Analysis of Piston Using Different Materials. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 175-179. |
Nirmala Devi E; Naresh A; Sudharshan Reddy G; Shyam prakesh B and Gnana Venkata Rajesh V. Heat Transfer Analysis of Plain and Corrugated Channel Using Nano Fluids.International Journal for Modern Trends in Science and Technology 2021, 7, pp. 180-197. |
Dr. M. Sreenivasa Rao; Ch. Kalyan Teja; D.L.N Srinivas; A. Rajkumar and A. Dinesh Kumar.Mono Wheel Vehicle. International Journal for Modern Trends in Science and Technology 2021, 7,pp. 198-203. |
N V S G Sasikiran; Venkatesh B; Veerabhadra Rao D; Praveen Kumar Ch and Sai Akhil A.Design and Analysis of Drum Brake. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 205-207. |
Santharao.D,Venkatesh .V,Nagasai.K,Harishbabu.K,Reddy. R(2021).Modeling and static analysis of friction stir welding tool.BULLETIN MONUMENTAL.22(7) |
Joga Rao.B, Rajesh. K, Dileep B, Diwakar Reddy M,Venkatesh, N. (1866). DESIGN AND ANALYSIS OF PISTON WITH VARIOUS MATERIALS USING SOLIDWORKS AND ANSYS SOFTWARE.BULLETIN MONUMENTAL.22(7) |
Balakrishna, M., Manikanta, K. V., Raja, G., Sai, M. Y., & Satyanarayana, L. V. V. DESIGN AND ANALYSIS OF IC ENGINE I SECTION CONNECTING ROD USING DIFFERENT MATERIALS BY ANSYS SOFTWARE.BULLETIN MONUMENTAL.22(7) |
Prasanna Kumar G; Eswar Kumar T; Kartheek K; Sudheer Kumar K and K S Reddy. Design and Finite Element Analysis of Screw Jack. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 70-78. |
M.Kedarnath; M.Subrahmanyam; P.Puroshottam; K.Mohan Srikrishna and P.Krishna Sai Vamsi. Thermoelectric Refrigerator using Peltier Module. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 79-83. |
Veera Raju P; Vasu G; Sai Kumar MVV; Satya Sai K and Jagadeeshwararao J. Design and Selection of Rapid Prototyping Method and Material for Three Fingered Grippers and Printing Time and Cost Estimation. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 84-91. |
Dr. T. Jayananda Kumar; M Sai Subrahmanyam; G Omkar; S Sathish Kumar and P Balaji. Fabrication of Electric Powered Two Wheeler. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 92-96. |
Sk. Avinash Kapil; K V Jagadeesh; N Venkatesh; V Manikanta and SkMd Rafi. Design and Analysis of Automobile Frame. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 97-102. |
Raja Surya Naga Manikanta. M,Harsha Reddy. S, Kumar swamy Naidu. R, Kiran. T, Dr. MVS Babu (2021).Design and analysis of alpha type Stirling engine.BULLETIN MONUMENTAL.22(7) |
Maneendra, P. V. V. S., & Prasanth, K. M. K. (2021). DESIGN AND COMPUTATIONAL ANALYSIS OF EXHAUST THROUGH ENGINE COOLING FAN USING CFD. Design Engineering, 1796-1802. |
SK. Nayeem; G.V.V. Satyanarayana; U. Jaya Sai Rahul; R, Srinivas and M. Venkata Teja. Design and Numerical Analysis of Tubo-Annular Combustor. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 103-108. |
Ramakrishna, G., Chowdary, O. S. S., Naidu, T. J., Hemanth, P. V. S. V., & Satyanarayana, K. V. V. (2021). DESIGN AND ANALYSIS OF CAM SHAFT FOR MULTI CYLINDER ENGINE. Design Engineering, 1499-1507. |
Alok Kumar; Aditya Ganesh N; Siva Kumar S; Srinivasulu M and Harish K. Comparative Study on Buckling Behaviour of Polymer Composite Shells with Metallic Shells for Under Water Vessels by FEA. International Journal for Modern Trends in Science and Technology 2021, 7. |
Muppidi Tarunkumar; Sambangi Raghuram; Velaga Veera Prudhvi; Nakka Sudheer and Rajnish Kumar Singh. Design and Analysis of the Propeller Blade. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 208-215. |
Ramakrishna, G., Surendra, V., & Kumar, K. S. (2021). DESIGN AND THERMAL ANALYSIS OF IC ENGINE FINS WITH DIFFERENT CROSS-SECTIONAL FINS. Design Engineering, 1519-1530. |
A. Babji; S.J.Sai Prakash; R. Manikanta and P.Danial Rajkumar. Design and Analysis of a Leaf Spring for Light Vehicle Mini Trucks. International Journal for Modern Trends in Science and Technology 2021, 7, pp. 114-120. |
Academic Year:2019-2020 |
PVVS Maneendra, V. Sai Nikesh, P. Nookanna Naidu, A. N. S. Reddy, and K. Dinesh, 2020, “Design and Fabrication of Automatic Multidimensional Spring Rolling Machine,” International Journal of Innovative Technology and Exploring Engineering, 9(7), pp. 9-12. |
Sk. Nayeem, K. Chaitanya, G. Murali Krishna, Ch. Dileep, and D. Venkata Ramana, 2020, “Optimization of Convergent-Divergent Taper Angle with Combustion Chamber of Rocket Engine through Numerical Analysis,” International Journal of Innovative Technology and Exploring Engineering, 9(6), pp. 76-81. |
D. Suman, P. S. Hari Prasad, K. N. V. S. Niranjan, K. Akhilesh, and K. J. N. Kumar, 2020, “Design and Fabrication of Thermoelectric Refrigerator using Peltier Module,” Journal of Emerging Technologies and Innovative Research, 7(3), pp. 606-610. |
E. Nirmala Devi, and T. Rajesh, 2020, “Experimental Examination on Forced Convection Heat Transfer in Laterally Perforated Finned Metal Matrix Composite Heat Sink,” International Journal of Innovative Technology and Exploring Engineering, 9(7), pp. 1323-1331. |
E. Nirmala Devi, A. Chandra Sekhar, P. Hemanth Kumar, A. Vishnu, and Ch. Karthik, 2020, “Preparation of Al 7075 B4C and Graphite Composite using Powder Metallurgy Technique,” International Journal of Advanced Science and Technology, 29(4), pp. 2321-2329. |
M. Balakrishna, D. Anand, I. Suresh, K. Dwarakesh, and Y. Satish, 2020, “Performance Analysis of Parallel and Counter Flow Heat Exchanger with Square Twisted Pipe,” International Journal of Emerging Technologies and Innovative Research, 7(6), pp. 227-234. |
M. Balakrishna, D. Sandeep, G. Sanjay, K. Jogiraju, and P. Sateesh, 2020, “Design Fabrication and Comparative Analysis of Industrial Safety Helmet Using Glass Fibres reinforced with Epoxy Resin,” International Journal of Advanced Research in Engineering and Technology, 11(3), pp. 144-151. |
G. Ramakrishna, B. Ramaswamy, K. Syam Babu, P. Rudra Sai, and K. Nanda Kishore, 2020, “Improving of Tensile and Compression Strengths by Banana and Sisal Fibre Reinforced Epoxy Composites Filled with Groundnut Shell Ash,” Journal of Information and Computational Science, 13(2), pp. 36-42. |
G. Ramakrishna, D. Ajay kumar, S. Manikanta,, N. Ajay Kumar, K. S. S. V. Prasad, and U. M. V. K. Yogiraju, 2020, “Improvement of Mechanical Properties of Epoxy Composites Filled With Coconut Shell Ash Using Jute and Sisal Fiber Reinforcement,” Journal of Information and Computational Science, 13(2), pp. 64-71. |
V. Nagendra Babu, and G. Ramakrishna, 2020, “Fabrication and Testing of Novel Aluminium Composite Panel and Analysis of Composite Panel for Impact Loads in Collision Environment for Four Wheelers Automobile,” International Journal of Innovative Technology and Exploring Engineering, 9(9), pp. 459-462. |
M. Sreenivasa Rao, B. Gopi, B. Sunil Kanth, and P. Avinash, 2020, “Hybrid Energy Efficient Multi Source Energy System with Iot Based Load Control,” International Journal of Innovative Technology and Exploring Engineering, 9(6), pp. 48-52. |
K. Hari Sivasri Phanindra, G. Ramakrishna, G. Jayasurya, and D. Naveen Krishna, 2020, “Experimental Investigation on Interfacial Heat Transfer Coefficient During Solidification of Aluminium with 3.2% Magnesium Alloy Casting in CO2 Sand Moulds,” International Journal of Advanced Science and Technology, 29(4), pp. 2310-2314. |
K. Hari Sivasri Phanindra, G. Ramakrishna, Y. Jagadish, and N. Anand Kumar, 2020, “Experimental Study on the Change in Hardness of Structural Steel (SA516) Post Fire Accidents,” International Journal of Advanced Science and Technology, 29(4), pp. 2315-2320. |
Alok Kumar, B Krishna Santhosh, B Venkatesh, and V Kishore, 2020, “Mechanical Properties Evaluation of Hybrid Polymer Composites with Bamboo and E Glass Fiber Produced by Hand Layup Process,” Journal of Emerging Technologies and Innovative Research, 7(3), pp. 1535-1543. |
Rajneesh Kr. Singh, E Bharath, K Chaitanya, and U Upendra, 2020, “Fabrication and Analysis of Single Basin Double Slope Solar Still with Finned Surface,” Journal of Emerging Technologies and Innovative Research, 7(3), pp. 112-115. |
K Sreenivasa Reddy, D Sai, B Vijay Sai and E Kamal Raju, 2020, “Hybrid Fireworks Algorithm for the Conversion of Planar Curve to B-Spline Curve,” International Journal of Engineering and Advanced Technology, 9(4), pp. 786-790. |
Santha Rao D., Arbaaz Khan, Subhasish Modak, B. Venkatesh, and S. Pawan, 2020, “Analysis of Shell and Tube Heat Exchanger for Waste Heat Recovery by using CFD,” Journal of Emerging Technologies and Innovative Research, 7(4), pp. 132-137. |
D. Santha Rao, PDSK Prasad, M M Shayam, and G Chandu, 2020, “Mechanical and Wear Properties of Friction Stir welding of Aluminium Alloys,” International Research Journal of Engineering and Technology, 7(4), pp. 518-522. |
D. Santha Rao, M. Jayaram, M. Harish, and M. Anil Kumar, 2020, “Characteristics of Butt Joint Produced by Friction Stir Welding Process,” International Research Journal of Engineering and Technology, 7(4), pp. 507-512. |
Ajay Kumar D, Ramakrishna G, Harsha Vardhan B, and Hemanth Kumar K, 2020, “Development of Design of Light Strike Vehicle and Analysis with Different Ballistic Materials, International Journal of Advanced Science and Technology, 29(3), pp. 6287-6297. |
Ramakrishna G, and Gr Selokar, 2019, "Advancement of Mechanical Assets of Banana Fiber Reinforced Epoxy Composites Loaded up with Groundnut Shell Cinder," International Journal of Mechanical and Production Engineering Research and Development, 9(5) pp. 1215-1230. |
Academic Year:2018-2019 |
Sk Nayeem, Jagadeesh Kumar S, Suman D, 2018, “Fluid Flow Characteristics and Thermal Conductive Heat Fluxes of Continuous Casting by COMSOL Multiphysics,” Journal of Emerging Technologies and Innovative Research, 5(11), pp. 478-486. |
Anjibabu D, Sk Nayeem, 2019, “Heat Transfer Phenomenon of Fluids in Corrugated Plate Heat Exchanger,” International Journal of Engineering and Advanced Technology, 8(5), pp. 975-978. |
D.SUMAN, S.S.N.S.MAHENDRA, S.ABHISHEK, SK.DAWOOD IBRAHEEM, P.THARUN, (2019). FLOOR CLEANING ROBOT WITH DUAL ROTATING BRUSHES AND ANDROID APP BASED CONTROL,Journal of Emerging Technologies and Innovative Research,6(3) |
D. Suman ,Y. uday , D. Manoj, G. Hari Krishna, FOUR WHEEL STEERING MECHANISM USING WIRELESS JOYSTICK CONTROL SYSTEM,International Journal of Research and Analytical Reviews,6(1) |
Sai Sasidhar K, Balakrishna M, 2019, “Experimental Evaluation for the Performance of VCR Diesel Engine by using Calophyllum Inophyllum Bio Diesel with Nano additives of Aluminum oxide,” International Journal of Mechanical Engineering and Technology, 10(3), pp. 1663-1671. |
Shaik Nayeem ,N.Vishnu ,S.Bhaskar ,D.Srinivas, ENHANCEMENT OF WELD BEAD HARDNESS BY EMPLOYING RANDOM VIBRATION DURING ARC WELDING,International Journal of Research and Analytical Reviews, 6(1) |
E. NIRMALA DEVI, A. SURYA TEJA, K. BHARGAV,M.NITHIN SAI,N.SRIKANTH,FABRICATION AND STUDY OF MECHANICAL PROPERTIES OF COMPOSITE NATURAL FIBER.Journal of Emerging Technologies and Innovative Research,6 (4) |
Shaik Nayeem, G. Gowri Shankar ,N.Vishnu, S.Bhaskar, D.Srinivas,ENHANCEMENT OF WELD BEAD HARDNESS BY EMPLOYING RANDOM VIBRATION DURING ARC WELDING ,International Journal of Research and Analytical Reviews ,6(1) |
Avinash V, Kedarnath M, Adwitheeya D, 2019, “Performance Analysis and Emissions Investigation of Dead Plastic Derived Oil Blended with Crude Oil Extracted Diesel,” Journal of Emerging Technologies and Innovative Research, 6(4), pp. 195-204. |
Shaik Nayeem ,B.Pavan kumar ,B.Arun bhaskar ,A.Jnanendra ,K.Vijay kumar, DESIGN AND FABRICATION OF WATER PUMPING SYSTEM USING WIND MILL,International Journal of Management, IT & Engineering,9(5) |
Bommidi Atcharao ,Sk.Nayeem,K.Vidyasri,P.Poorna mohan, THERMAL AND MECHANICAL ANALYSIS OF SQUARE HONEYCOMB PLATE FILLED WITH AIR ,Journal of Emerging Technologies and Innovative Research,5(11). |
M. Balakrishna , A. D. Bala Krishna , K. H. S. S. Akhil kumar , G. G. S. Vara prasad , Tufan Digar, DESIGN AND FABRICATION OF MULTIPURPOSE SOLAR OPERATED KISAN MACHINE,Journal of Emerging Technologies and Innovative Research,6(3) |
M.Balakrishna , K. M. S. Vatsav, T. Rajeev, R. Anudeep Reddy, CH. Rahul Teja,FLOOR CLEANING ROBOT WITH IoT BASED CONTROLLER, International Journal of Research and Analytical Reviews,6(1) |
Academic Year:2017-2018 |
Vidyasri K, Kedarnath M, Lovaraju P, 2017, “Mixing Enhancement by using Airtabs in Convergent Nozzle,” International Journal for Modern Trends in Science and Technology, 3(8), pp. 41-43. |
Sreenivasa Rao M, and Venkaiah N, 2018, “Multi Response Optimization of WEDM Process in Machining Nimonic 263 Super Alloy,” International Journal of Materials and Product Technology, 56(3), pp. 187-206. |
Narayana PSVVS, Jayanand Kumar T, 2017, “Design and Analysis of Hypersonic Aircraft with Transonic and Supersonic Fluid Flow Analysis,” International Journal for Scientific Research and Development, 5(3), pp. 112-116. |
Phaneendranarayana M, Balakrishna M, 2018, “Natural Fibre Reinforced Polymer Hybrid Plastic Fabrication and Investigating its effect on Wind Turbine Blade,” International Journal of Scientific Research and Review, 7(5), pp. 252-265. |
R.Sai Chandra, Dr. T. Jayananda Kumar,(2017)Remotely Controlled CNC Laser Engraver with Android Mobile or PC using Team Viewer Software,International Journal of Engineering Science and Computing.7(5) |
Dr. M Varaprasada Rao ,Dr. Vidhu KP ,MSRK Chaitanya,(2017),Outsourcing Partner Selection for Aircraft Servicing Maintenance Repair & Overhaul using Multiple Criteria Decision Making Model - ELECTRE-III,International Journal of Engineering& Scientific Research,5(7) |
Venkateswara Rao K, Balakrishna M, 2018, “Design and Simulation Analysis of Valveless Pulsejet Engine with Tubercles,” International Journal of Scientific Research and Review, 7(6), pp. 299-308. |
Academic Year:2016-2017 |
Snigdha Pandey, Joga Rao B, Jayanand Kumar T, 2016, “Computational Estimation of Flow Through the C-D Supersonic Nozzle and Impulse Turbine Using CFD,” International Journal for Modern Trends in Science and Technology, 2(11), pp. 24-32. (UGC Care) |
Rangabhaskar A, Jogarao B, 2016, “Design Optimization of Catalytic Converter to Achieve Limited Back Pressure in Diesel Engine by using CFD,” International Journal of Science Engineering and Advance Technology, 4(7), pp. 28-36. |
Sreenivasa Rao M, and Venkaiah N, 2017, “Modified Flower Pollination Algorithm to Optimize WEDM Parameters while Machining Inconel 690 Alloy,” International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME), Tiruchirapalli, March 10-12. |
Sreenvasa Rao M, and Venkaiah N, 2017, “Experimental Investigation on Recast Layer Thickness and Micro Hardness of WEDMed surfaces of Nimonic 263,” 1st International and 18th ISME Conference, Warangal, February 23-25. |
K S Reddy, A Mandal, KK Verma, G Rajamohan, 2016, “Fitting of Bezier curves using the fireworks algorithm,” International Journal of Advances in Engineering and Technology, 9(3),pp. 396-403. |
K S Reddy, A Mandal, KK Verma, G Rajamohan, 2016, “Fitting of Bezier surfaces using the fireworks algorithm,” International Journal of Advances in Engineering and Technology, 9(3),pp. 421-429. |
Sreenivasa Rao M, and Venkaiah N, 2016, “Modelling of Circularity Error while Machining Inconel 690 using WEDM,” International Journal of Applied Engineering Research, 11(6), pp. 3999-4006. |
Sreenivasa Rao M, and Venkaiah N, 2017, “A Modified Cuckoo Search Algorithm to Optimize Wire EDM Process while Machining Inconel 690,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(5), pp. 1647-1661. |
Sreenivasa Rao M, and Venkaiah N, 2018, “Experimental Investigations on Surface Integrity Issues of Inconel 690 during WEDM Process,” Proceeding of the iMech, Part B: Journal of Engineering Manufacture, 232(4), pp. 731-741. |
Faculty Name: Mrs. E. Nirmala Devi
Designation: Associate Professor
Department: Mechanical Engineering
Title of the Invention: Early failure detection of electric vehicle batteries using gas sensors
Date: 28-07-2021
Best Paper award in international conference conducted by MNIT, Bhopal in September 2021
Faculty Name: Dr. D. Santha Rao
Designation: Professor
Department: Mechanical Engineering
Title of the Paper: Experimental investigation on mechanical properties of kenef and flax fibers reinforced epoxy composites
CERTIFICATION COURSE | NO OF STUDENTS |
---|---|
AVEVA(PDMS) | 46 |
ARC CERTIFICATION | 24 |
NPTEL | 6 |
BHARATH FORMULA KARTING | 9 |
Virtual competition of BAJA SAE India | 7 |
LEVEL - A Course of Dassault Systems(2015-19) | 122 |
LEVEL - A Course of Dassault Systems(2016-20) | 67 |
LEVEL - B Course of Dassault Systems(2016-20) | 31 |
LEVEL-A Course of Dassault systems(2017-21) | 48 |