DEPARTMENT OF AUTOMOBILE ENGINEERING
DEPARTMENT PROFILE
Automobile Engineering is in transition phase from traditional Petrol/Diesel Engine vehicles to Electric, Hybrid and Autonomous stages. Automobile industry is a fast moving sector requiring engineers who are conversant with the concept of product design, functional utility and integrated technology used in the manufacture of an Automobile. Students at GIET are educated and trained competently in these areas. And our Automobile Engineers are already proving their quality and worth in the Automobile Engineering field.
Vision
To be recognized as an epitome of Automobile Engineering
MISSION
The department indulges in activities to inculcate knowledge, skill and attitude by undertaking activities such as:
- 1. Teaching regular practices and updating new technologies through utilization of software tools and sophisticated teaching aids
- 2. Guest lectures, workshops, seminars and conferences
- 3. Bridging the gap between industry and college through frequent industrial visits
- 4. Carrying out research and development projects
- 5. Developing entrepreneurial skills through internships and case studies
POs
After completion of the four year program, a successful student will be able to:
- PO-1 Apply the knowledge in mathematics, science and engineering for practical problem
- PO-2 Design and conduct experiments, interpret data, analyze it and report results
- PO-3 Design an Automobile or relevant system that meets the comfort and safety of the user or worker with global standards
- PO-4 Investigate and unearth the causes of failure of automobile components, industrial accidents, road mishaps.
- PO-5 Use modern engineering tools, equipment and software tools to analyze the problems
- PO-6 Apply engineering solutions in global and societal context
- PO-7 Find the causes of environment pollution and solutions for sustainability
- PO-8 Recognize and practice the professional and ethical values and act accordingly
- PO-9 Transform the innovative ideas individually as well as with engineering & science laboratory teams and multidisciplinary teams
- PO-10 Communicate effectively in verbally, graphically and written forms to increase coordination and cooperation in the team and use appropriate tone in communication with workers of different knowledge levels
- PO-11 Design, plan and execute projects in orderly manner to meet the financial and other constraints
- PO-12 Understand the impact of modern technology on society by the awareness of the contemporary issues and act appropriately throughout life
PEOs
Within a few years after completion of the program the graduate will be:
- PEO-1 Catering to the needs of Indian and multinational Automobile industriesand/or
- PEO-2 Competent with up-to-date technological background to synthesize data, formulate and undertake applications of Automotive design with viable solutionsand/or
- PEO-3 Working on multidisciplinary projects with competence in professional skills and ethicsand/or
- PEO-4 Successful in Higher studies
PSOs
After successful completion of the program a graduate of Automobile Engineering program will exhibit an:
- PSO-1 Ability to apply various engineering principles and CAD/CAM software to design, manufacture and analyze automobile systems, subsystems and components
- PSO-2 Ability to operate, maintain, trouble shoot and repair various types of automobiles
- PSO-3 Ability to establish start-ups in automobile field to manufacture subsystems or vehicle maintenance
Constitution of the Board of Studies - Department of AUTOMOBILE ENGINEERING
| Name | Designation |
|---|---|
Mr. V. SUBRAHMANYAM | Head of the Department and Chairman-BoS |
Dr. SVSN MURTHY | Professor, AME, GIET(A) |
Dr. P. SENTHIL KUMAR | Associate Professor, Anna University |
Dr. K. CHANDRASEKHAR | Professor, Vignan University |
Dr. D. LINGARAJU | HOD PEPCE, Asst. Professor, Mechanical Engineering, JNTUK |
Mr. B. ATCHARAO | Design Engineer, HYUNDAI R&D |
Mr. D. MADHU SUDHAKAR | Executive, Assembly Production Control, KIA MOTORS |
Automobile Chassis Components Laboratory
Tuning of Automobiles Laboratory
Automobile Servicing and Maintenance Laboratory
Academic Year:2020-2021
V.Subrahmanyam, D.LingarajuandV.V.Subbarao (2021), "Application of Taguchi Technique to study the Influence of Process Parameters of Ultrasonicator Assisted Stir Casting on Tensile Strength of Al6061/Nano Rice Husk Ash Composites”, 2nd Innovative Product Design and Intelligent Manufacturing systems: National Conference (IPDIMS 2021), NIT Rourkela, 12th -13thFeb 2021, SPRINGER Lecture Notes.
V.Subrahmanyam, D.LingarajuandV.V.Subbarao (2021), "Effect of Nano Rice Husk Ash Reinforcement on the Hardness of Al6061 Using Taguchi Method”, 4th International Conference on Innovations in Mechanical Engineering (ICIME-2021), Guru Nanak Institutions, Khanapur, Ibrahimpatnam, Hyderabad, 26th-27th Feb 2021, SPRINGER Lecture Notes.
MV Raghavendrarao (July 2021), “CAD & CAE of Plug-in Hybrid Electric Two Wheeler by Autodesk Fusion 360”, International Journal for Modern Trends in Science and Technology, Pg.01-06, isbn978-81-951049-5-6.
S. Rajasekhar (July 2021), “Development of Electric Two-Wheeler Vehicle”, International Journal for Modern Trends in Science and Technology, Pg.07-11, isbn 978-81-951049-5-6.
G. Naveen (July 2021), “Fabrication of Hybrid Scooter”, International Journal for Modern Trends in Science and Technology, Pg.12-15, isbn 978-81-951049-5-6.
TV Dharmaraju (July 2021), “Development of Last Mile Delivery Electric Vehicle”, International Journal for Modern Trends in Science and Technology, Pg.16-27, isbn 978-81-951049-5-6.
TV Dharmaraju(July 2021), “Numerical Simulation of an Electric Last Mile Delivery Vehicle”, International Journal for Modern Trends in Science and Technology, Pg.28-33, isbn 978-81-951049-5-6.
MV Raghavendrarao (2021), “Wireless Charging System in Electric Vehicles”, International Journal for Modern Trends in Science and Technology, Pg.34-36, isbn 978-81-951049-5-6.
SubrahmanyamVasamsetti (July 2021), “Design of Low-Speed Intelligent Brake Assist System in Vehicle”, International Journal for Modern Trends in Science and Technology, Pg.37-40, isbn 978-81-951049-5-6.
Manoj Kumar Roy (July 2021), “Accident Detection and Vehicle Tracking Along with Alcohol Sensor”, International Journal for Modern Trends in Science and Technology, Pg.41-44, isbn 978-81-951049-5-6.
G. Naveen (July 2021), “Self Protecting Braking System for Electrical Bicycle”, International Journal for Modern Trends in Science and Technology,Pg.45-49, isbn 978-81-951049-5-6.
Manoj Kumar Roy (July 2021), “Design and Fabrication of Chainless Bicycle”, International Journal for Modern Trends in Science and Technology,Pg.50-54, isbn 978-81-951049-5-6.
SubrahmanyamVasamsetti (July 2021), “Design and Development of Solar Assisted Bicycle”, International Journal for Modern Trends in Science and Technology,Pg.55-59, isbn 978-81-951049-5-6.
SubrahmanyamVasamsetti (July 2021), “Blind Spot Accidents Avoidance Systems in Automobiles”, International Journal for Modern Trends in Science and Technology,Pg.64-67, isbn 978-81-951049-5-6.
Academic Year:2019-2020
V.Subrahmanyam, MabuSubaniShaikandTamilkodi R (March 2019), "Detection of FITS Seizure by Alexa Using IoT”, IEEE International Conference on Vision Towards Emerging Trends in Communication and Networking (ViTECoN’19), Vellore Institute of Technology, Vellore, 30-31st March 2019.
Subrahmanyam V*, LingrajuDumpala, Subbarao V. V., “Preparation of Rice Husk Ash Nanoparticles and calculation of particle size using Debye-Scherrer Method”, International Journal of Management, Technology and Engineering (IJMTE), Vol. 9, Issue 7, July 2019, Pg.190-199, issn2249-7455.
Subrahmanyam V, Abhishek G, A Raj S, and Joseph Samson P, “Stramlining and Aerodynamic Performance Add-on Devices of Sports Cars”, MuktShabd Journal, Vol. 9, Issue 10, May 2020, Pg.2569-2577, issn2347-3150.
Subrahmanyam V, Nikhil TejaGuda, Bharat VikashSurisetti, and Sri Ram CharanKolla, “Enhancing Aerodynamic Performance of a HatchBack Model Passenger Car using Ansys Fluent Software”, MuktShabd Journal, Vol. 9, Issue 10, May 2020, Pg.2593-2605, issn2347-3150.
V.Subrahmanyam, "Rice Husk Ash Reinforced Al6061 Metal Matrix Composites for Electronic Applications as Heat Sink Devices", National Conference on Nanotechnology applications in Electronic and Biotechnology (NCNEB 2020), Godavari Institute of Engineering & Technology, Rajahmundry. Jan2020.
V.Subrahmanyam, "Evaluation and Pollutants Characteristics of Twin Cylinder Diesel Engine Fueled with Waste Plastic Oil & Diesel Blends with Multifunction Diesel Fuel Additive", National Conference on Nanotechnology applications in Electronic and Biotechnology (NCNEB 2020), Godavari Institute of Engineering & Technology, Rajahmundry. Jan2020.
V.Subrahmanyam, "Design, Modeling and Fabrication of Bike Ambulance Suitable for Interior Areas", National Conference on Nanotechnology applications in Electronic and Biotechnology (NCNEB 2020), Godavari Institute of Engineering & Technology, Rajahmundry. Jan2020.
Manoj Kumar Roy, "Design and Fabrication of Mini Electric Bike", MuktShabd Journal, Vol. 9, Issue 10, May 2020, Pg.2578-2586, issn 2347-3150.
TV Dharmaraju, "Design and Fabrication of Mini Hover Board Kart", MuktShabd Journal, Vol. 9, Issue 10, May 2020, Pg.2587-2592, issn 2347-3150.
Siripuram Ravi Varma, "Design and Fabrication of Front wheel drive Electric Bicycle", MuktShabd Journal, Vol. 9, Issue 10, May 2020, Pg.2606-2611, issn 2347-3150.
S. Rajasekhar, "Design of Voice Alert System in Vehicles", MuktShabd Journal, Vol. 9, Issue 10, May 2020, Pg.2626-2631, issn 2347-3150.
Academic Year:2018-2019
Subrahmanyam V, D.Lingaraju and V.V.Subbarao, "Synthesis, Characterization and Hardness Studies of Nano Rice Husk Ash Reinforced AL6061 Nanocomposites”, Journal of Engineering Science and Technology, Vol. 13, No. 9, Sep 2018, pp. 2916-2929.
Subrahmanyam V, D.Lingaraju and V.V.Subbarao, "Optimization of Milling Parameters of Planetary Ball Mill for Synthesizing Nano Particles”, International Journal of Mechanical Engineering and Technology (IJMET), Vol. 9, Issue 11, November 2018, pp. 1579-1589.
Subrahmanyam V, RajasekharSandhi, RajasekherJagathani and ArunaKunda, "Modeling, Fabrication and Analysis of Four Wheel Steering System to Quadricyle Named Spinner”, International Journal of Mechanical Engineering and Technology (IJMET), Vol. 9, Issue 13, December 2018, pp. 666-675, issn0976-6340.
SubrahmanyamV, ArunaKunda, Manikanta Dora M, “Design of Diesel Engine Components for a Power plant suitable to TATA nano car”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 115-124, issn 2349-5162.
SubrahmanyamV, Raja SekharSandhi, Manikanta Dora, “Design of Three Cylinder In-line Petrol Engine An engine Suitable for a small hatch back”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 108-114, issn 2349-5162.
Subrahmanyam V, PavanSai Kumar Gupta B, Madhubabu A, VikashPadalCh, “DESIGN OF BATTERY ELECTRIC MOPED”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr2019 Pg. 125-129, issn 2349-5162.
Subrahmanyam V, Abhishek Kumar Tripathi, JanakiramSaikumar D, Sreedar P, Guru Babu N, “FABRICATION OF MICRO ELECTRIC BIKE”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 130-136, issn 2349-5162.
Subrahmanyam V, Abhishek Kumar Tripathi, JanakiramSaikumar D, Sreedar P, Guru Babu N, “FABRICATION OF MICRO ELECTRIC BIKE”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 130-136, issn 2349-5162.
P. Revathi, “Design of Emergency Ambulance for Agency Areas”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 233-236, issn 2349-5162.
B. Chandrakala, “Design of Compact Patient Carrying Trailer”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 162-165, issn 2349-5162.
M. Manikanta Dora, “Modelling of Electric Skate Scooter”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 158-161, issn 2349-5162.
S. Rajasekhar, “Design and Analysis of Electric Tricar”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 154-157, issn 2349-5162.
M. Manikanta Dora, “Fabrication of Electric Tricar”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 150-153, issn 2349-5162.
TV Dharmaraju, “Design of Foldable Electric Scooter”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 144-149, issn 2349-5162.
S. Rajasekhar, “Design of Electric Bicycle”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 137-143, issn 2349-5162.
TV Dharmaraju, “Design of Foldable Electric Scooter”, Journal of Engineering, Technology and Innovative Research (JETIR), Vol. 6, Issue 4, Apr 2019, Pg. 144-149, issn 2349-5162.
Book Published
Subrahmanyam V and G. Satish , “Analysis of Composite Laminated Plates under UD load using CLPT”, Monograph / Lambert, Sep 2018. ISBN 978-613-9-92414-1 Academic Year:2016-2017
Subrahmanyam V, "Future Automobile an Application of IoT", International Journal of Trend in Research and Development (IJTRD), ISSN 2394-9333, Vol 2, Issue 1, Apr 2017, pp. 88-90.
Subrahmanyam V, D.Lingaraju and V.V.Subbarao, "Aluminium Metal Matrix Composites Reinforced by Si Particles: A Review", TAME-2016(National Conference on Technological Advancements in Mechanicl Engineering) at Jawaharlal Nehru Technological University: Kakinada, Kakinada, Andhra Pradesh, India. ISBN : 978-93-85100-57-4. Pp 27-29.
K. Aruna, "Future Automobile an Application of IoT", National Conference on Emerging Trends in Computing (NCETC-2K17), Godavari Institute of Engineering & Technology, Rajahmundry. Apr 2017.
Subrahmanyam V., Non aqueous Nano Cooling Oil Suitable for High Temperature of Engines in Vehicles, 13/08/2021s
Subrahmanyam V., Smart Logistics and Transportation using IOT, 03/09/2021
ALUMNI STUDENTS WENT ABROAD FOR HIGHER STUDIES
| Name | Course | University | country | Photograph |
|---|---|---|---|---|
Katru Murali Krishna | MS, Motive Power Tech | DURHAM COLLEGE, CARMEN FRASSICA | CANADA |
|
G.Pavan Krishna Varma | M.S. Mobility Engineering | UNIVERSITA DEGLI STUDI DI PAVIA | ITALY |
|
Thota Chaitanya Sai | MS in Engineering Science | TECHNISCHE HOCHSCHULE ROSENHEIM | GERMANY |
|
G.Vamsi Pavan | M.S. Engineering (Automotive) with Advanced Practice | Wrexham Glyndwr | UK |
|
P.Jhansi Praveen Kumar | M.S. Mobility Engineering | POLITECNICO MILANO | Italy |
|
Sabbina Rajesh | M.S. Mobility Engineering | POLITECNICO MILANO | Italy |
|
Abhishek kumar Tripathi | M.S. Automotive Engineering with Electrical Vehicles | OXFORD BROOKS | UK |
|
Kottu Devi Prasad | MS Management (Project Management) | BPP UNIVERSITY, LONDON | UK |
|
Challa Naga Phaneendra Reddy | MS, Computers and Information Systems Security | Dakota state University | South Dakota, US |
|
